How to Sharpen a Cut Throat Razor

How to Sharpen a Cut Throat Razor
Shaving with a straight razor transforms a daily ritual into a refined skill, and blade sharpness is key. A dull blade can pull at the hair and skin, leading many to apply excessive pressure and risk nicks and cuts.
Think of the difference between a sharp knife smoothly slicing through bread versus one causing it to crumble. That’s the impact of razor sharpness on your shave.
Quality tools are essential in every craft. Just as a barista wouldn't compromise on an espresso machine, a man should prioritise a top-notch blade.
A sharp and well-maintained cut-throat razor can offer a seamless and clean shave, ensuring a polished finish every time.
Mastering the art of sharpening your straight razor isn't as challenging as it seems. With the right techniques and tools, anyone can ensure their razor stands the test of time, offering flawless shaves throughout its lifespan.

Understanding Stropping vs Honing

Two fundamental processes come into play here: stropping and honing. Both are vital, but each has its unique role and purpose.

What is Stropping?

Stropping is all about refining and polishing your blade.

This practice removes those microscopic imperfections that might form on the blade either before or after a shave. It's the act of preparing and maintaining the blade to ensure every shave is as smooth as the last.

Think of stropping as a regular tune-up for your razor blade. It's not only about keeping it sharp but also ensuring its longevity. A well-stropped blade promises fewer irritations and a more comfortable shave.

What is Honing?

Honing, on the other hand, is a more intensive process. It's about restoring the blade's sharpness when it's past the point of mere stropping.

Honing involves carefully removing metal from the blade using a series of abrasives until it's back to being "shave ready."

While the techniques employed are similar to stropping, honing requires a keener eye for detail and a bit more time.


Selecting the Right Tools for Razor Sharpening

Quality tools ensure that your razor provides consistent, optimal performance. So, as you set out to achieve that flawless shave, here are the essential tools to consider:


Your strop is instrumental in maintaining your razor's edge. Selecting a high-quality strop is as vital as the razor itself. The different types of strops available are as follows:

  • Bench Strop: A strip of leather attached to a wooden base, allowing you to lay it flat on a table or bench. Its stable surface is beginner-friendly and works well with sharpening pastes.
  • Loom Strop: A premium choice, it features leather stretched around an adjustable frame (picture a drum skin made of leather). It offers tension adjustments, but can be tricky for newbies.
  • Paddle Strop: Think of it as a bench strop but with a handle for easy holding, making your stropping motion controlled. Handy and ergonomic, it’s a less common but effective choice.
  • Hanging Strop: A long strip of leather, like a belt, which hangs from a hook or handle. As you pull it tight, you guide your razor down its length. Though widely preferred, it requires some practice to perfect.


Leather is traditional and consistent. Alternatives like vinyl or newspaper can work, but leather remains the gold standard.

Leather Cowhide & Fabric Hanging Strop by Roché


Honing refines your blade's edge, ensuring it's sharp and ready for a smooth shave. Various options exist, including:
  • Natural Stones: Mined from the earth, these stones lack standard grit ratings (see below) and are best for those familiar with honing techniques.
  • Lapping Films: Visualise adhesive sheets, a bit like stickers, sprinkled with abrasive particles. They're an affordable and effective option, especially for those starting out.
  • Synthetic Water Stones: Crafted stones with predictable, consistent grit. Ideal for those who want reliable results every time

Grit Guide

  • 1000 grit: Your foundation. It's like sandpaper, roughing out the blade's primary edge. Most of your honing time (roughly 75%) will be here.
  • 4000 grit: Medium-fine. This fine grain further sharpens the edge, accounting for about 15% of your honing time.
  • 8000 grit: Very fine. This polishes the blade, making it razor-sharp. Usually the final sharpening phase, making up about 10% of the process.
  • 10,000 grit: Ultra-fine. An optional choice for those who seek the ultimate edge smoothness

Investment in top-tier tools not only guarantees a consistently sharp blade but also extends the life and efficiency of your razor. You can view our range of Honing stones here. Up next, we'll guide you through the techniques to make the most of them.

a traditional honing stone

How to Strop a Straight Razor

Stropping is integral to maintaining a straight razor's keen edge. It’s the most frequent maintenance task you'll carry out, realigning the blade's edge for that smooth, close shave every time. Here's how to achieve perfection with your stropping technique (we'll focus on the popular hanging strop):

Step 1: Set Up and Warm-Up Your Strop

Choose a spacious, distraction-free area to set up. Hang the strop securely so you can pull it tight without overstretching. Before starting, rub the strop's surface gently with your palm. This action not only cleans the strop but also conditions the leather with the natural oils from your hands. Always be cautious of any nicks or cuts on the strop, ensuring you avoid them during the stropping process.

Step 2: Position Your Razor

Lay the razor flat on the strop, ensuring both the cutting edge and back make contact. Hold the razor between the blade and the handle using just your fingertips. This grip provides you with the precision and control you'll need for the stropping process.

Step 3: Glide the Razor Over the Leather

Begin by gently pulling the razor towards you, leading with the blade's back. Use only the razor's weight without exerting additional downward pressure. Remember to stop an inch before the strop’s end. If you have a narrow strop (less than 3 inches wide), it's a good idea to glide the razor in an "X" pattern to ensure the entire blade is stropped equally.

Step 4: Flip Your Razor the Right Way

After completing your outward stroke, rotate the razor over its spine, keeping it in contact with the leather. This movement should be gentle, akin to the sensation of slowly turning a key in its ignition, ensuring the cutting edge now faces away from you.

Step 5: Return Journey

Now, drawing the razor back towards you, remember to lead with the spine. Again, no additional pressure is necessary. Continue this motion until you're about an inch from the strop’s end. Typically, repeating this entire process 20-40 times will have your razor ready for a perfect shave.

Additional Stropping Tips:

  • Only strop before shaving. Stropping post-shave may embed the leather with metal fragments from the blade.
  • Clean your blade with soap and water if honed before stropping. Dry it, avoiding the edge to prevent potential metal fragments from harming the strop.
  • Maintain a straight, taut strop throughout.
  • Always move the blade towards its back, never its cutting edge.
  • Proceed with patience and focus. Hasty or inattentive actions can be costly.
  • Over time, if your razor's performance diminishes, consider a strop pasted with a mild abrasive. If ineffective, it might be honing time


How to Hone a Straight Razor?

Honing a straight razor is an essential maintenance routine to ensure the blade retains its sharpness. For this guide, we will focus on using Synthetic Water Stones as the honing tool of choice.

Step 1: Set-Up Your Stones and Work Area

Identify an area free of obstructions and with sufficient room for comfortable movement. If your stones require soaking, immerse them in clean water. Always have honing oil, running water or a spray bottle on hand, as keeping your honing stone lubricated will prevent overheating. Before you begin, ensure that your stones are perfectly flat or lapped; if they're uneven, it could lead to blade damage.

Step 2: Position Your Razor on the Stone

Lay the razor flat on the end of the stone closest to you. Both the edge and the spine of the razor should be in contact with the stone. This positioning ensures the spine sets the angle for honing. Use your right hand to grip the tang (the end of the blade) and the handle, while your left index and middle fingers rest on the blade, keeping it flat. Before each motion, spray the stone with water to keep it lubricated.

Step 3: Glide the Razor Across the Stone

Without exerting any additional pressure, gently push the razor away from you using your right hand. Your left-hand fingers should guide and stabilize the blade. When you're about half an inch from the end of the stone, stop. Just as with stropping, always lead with the edge rather than the spine.

Step 4: Flip Your Razor Correctly

Roll the razor on its spine, ensuring the cutting edge is now facing you. Spritz the stone with water once again to ensure it remains lubricated. This flipping method is crucial, especially for beginners, as it helps prevent potential damage to the blade. With time and experience, you'll gain more confidence in this step.

Step 5: Return Stroke

Repeating the motion described in Step 3, now gently push the razor towards you. Once again, ensure you're not applying pressure and stop just before reaching the end of the stone. After a series of strokes, you can perform various sharpness tests to determine if you need to proceed to the next stone.

Important Honing Tips

  • Always keep your stone wet. A dry stone can lead to subpar results and potential damage. As grandpa always said: “Don’t hone on a dry stone.”
  • Ensure the entire blade remains in contact with the stone during each stroke. Use fingertips along the length of the spine for added stability.
  • The razor's spine should determine the honing angle. This angle ensures an effective honing process without causing damage.
  • Never flip the blade over on the edge, as this could dull it.
  • For longer razors, adapt your technique by starting with the heel on the stone and the toe slightly overhanging. Gradually shift sideways to cover the entire blade length.
  • Only use one side of your honing stone to maintain consistency and prevent any potential wobbling. Marking the other side with an 'X' or noting the logo (if present) can help differentiate the two sides.
  • Honing is not about speed but precision. It's better to be slow and meticulous, especially when starting out. With time and practice, you'll naturally become faster without compromising on accuracy.

Remember, honing is both an art and a skill. Regular practice on a fine stone will ensure that you develop your technique without significantly reducing the life of your razor. Always be patient and methodical in your approach to achieve the best results and prolong the sharpness and longevity of your straight razor


Maintaining your Straight Razor

Straight razors are known for their precision and durability, but their longevity largely depends on proper care and maintenance. While it may take a few extra minutes, dedicating time to care for your straight razor can result in decades of optimal use and save you considerably on replacements and repairs.

Step 1: Clean and Dry the Razor

After honing or a shaving session, ensure you remove all residues from the blade with a soft cloth. To preserve its cutting edge and avoid premature dulling, it's crucial to dry the razor thoroughly after every use. Rust, discoloration, and a dulled blade can result from moisture exposure. Using a microfiber towel, wipe the razor meticulously and allow it to dry in an area with minimal humidity, ensuring the blade is left open. Never store the razor while it's still damp. 

Step 2: Lubricate and Protect

Once the razor is completely dry, apply a thin layer of mineral oil, like baby oil, to the blade. This acts as a protective layer, shielding the blade from the natural humidity in the air and preventing oxidation. For those who use the folding variety of straight razors, it's essential to apply a few drops of oil to the folding mechanism, as this region is particularly susceptible to rust.

Step 3: Proper Storage

The way you store your straight razor can significantly influence its lifespan. Consider using a handcrafted straight razor display box, which often includes protective padding, ensuring your razor remains shielded from potential damage and retains its pristine condition. Before placing it in storage, always ensure the blade has been meticulously wiped with a microfiber cloth.

Always remember...

With proper care and attention to detail, your cut throat razor can remain a reliable tool for decades. Dedicate the time and respect it deserves, and it will undoubtedly reward you with consistent performance and unparalleled longevity.

Conclusion - Phew!

That is everything. If you are interested in shopping with us then check out the Cut Throat Club's product range.
We would love to get your input on any differences of opinion you have or other lessons you have learned that our readers would value - Please leave a comment below.